Marble Water Fountain Manufacturer today teaches you how to deal with stone gaps.
1. First, clean the original filler between the stone gaps, then use the special stone slitting machine to re-align the slits in the original stone installation to minimize the gap difference between the stones, and then use the stone close to the minimum. The color of the marble glue fills it.
2. Choose the marble glue that is close to the color of the stone itself and properly color the marble glue to make it close to the original stone color to improve the overall sense and achieve the most ideal visual effect.
3. Fill the prepared marble glue. Since the marble glue will shrink to a certain extent after it has completely solidified, the marble glue should be slightly higher than the stone level, so that it will not be filled multiple times.
4. Grinding and polishing the filler and grinding the filler to make it a horizontal plane, increase the overall sense of the stone, and solve the problem of high and low gaps between the gaps to prevent the gap from returning to black again. Use a granite refurbished machine with a special cut-out abrasive piece to carefully polish the cut position to make it a flat whole with the stone.
5. Grinding and Polishing: Using a special granite polishing machine, the stone is ground from 50-3000 stone water grinding pieces from coarse to fine, which makes the ground bright and new.
6. Crystallization treatment: the stone crystal powder and the crystallizing agent are matched with the crystal surface grinding machine to polish, and under the heavy pressure of grinding, the physical and chemical reaction of the stone and the crystal powder under high temperature is combined to form a dense and hard crystalline protective layer. After crystallization, it can enhance color and brightness, and it can also achieve anti-slip, waterproof and oil-proof effects.
If you want to know more about Marble Carved Table, please visit our website.
hcsculpture 